Stainless Steel Electronic Forklift Scale Solution

Now many manufacturers of workshops, warehouses will use stainless steel electronic forklift scales, it is small and flexible, not only to facilitate the transport of goods, but also directly weigh the weight of goods in the handling, is a very easy to use, practical electronic scales. When we use a forklift scale everyday, we need to pay attention everywhere.

Some parts of the forklift scale are still relatively delicate, so try to avoid excessive bruising when moving.

If the forklift often needs to transport objects frequently, it will often rise and fall. The process is very likely to cause the problem of heavy hops or instability. If this problem arises, then we should check more if the upper lid and the lower scale are touching. If it touches, it is a cause of failure. We can remove the lid and check it. In addition, we need to see whether the sensor is equipped with gaskets, and whether the sensor height is sufficient; if the sensor height is not enough, we should start the solution (the common solution is to install the gasket is best to solve, but do not rule out other better methods) in order to maintain There is a certain gap between the upper and lower scale covers.

If we see that the forklift's scale itself has been pressed by a heavy object for a long time, this phenomenon should be stopped immediately. This is very unfavorable for the forklift scale itself. In addition, there is an overload phenomenon, which is common in some companies due to lack of basic knowledge of workers weighing, this will directly affect the life of forklift scales.

If the forklift scale is not the same in the four corners when weighing, how to do it if the repeatability is inconsistent? When this problem is encountered, we must first check whether the screws fixing the sensor are loose. If the screws are loose, we need to tighten the screws; then check whether the steel plate of the forklift and the beam are deformed. If there is any deformation, correction or direct replacement is required. . If the above problems are not solved, then the proposal is still asked by relevant professionals to solve it.