Forklift gear pump steering system common faults and solutions
August 05, 2022
Forklift gear pump is commonly used system has a drive system, lifting system, hydraulic system, brake system, steering system, these systems are often more prone to failure of the system, and now small series to solve Is that it steering system common faults and solutions, as follows: Forklift gear pump steering system common faults and solutions First, the steering oil spills, the reasons for the failure are: 1, the steering gear of the joints (body, Pan, stator, rotor) oil spill, this approach is to deal with the replacement of seals, cleaning steering, joints or even stronger bolts; 2, journal or relief valve ring damage, this treatment is relatively simple, Is better at the journal and overflow valve seal; 3, limit bolt washers uneven, this approach is to polish the washer or better washer. Second, the steering failure, the failure of the reasons are: 1, the steering wheel spring break or deflection of the pin shaft may also be a fracture or deformation of the coupling opening, this approach is better spring, pin, Coupling; 2, safety valve failure, the solution is to clean the safety valve, replace the spring; 3, steering cylinder leak is too large, the solution is to replace the seal or cylinder. Expand to read: China Construction Water Exhibition Pump Valve Pipe Fittings Exhibition Water Expo Xiamen Maritime Exhibition Internet + Forum Industrial Internet (Xiamen) Technology Co., Ltd. Asia Pump Network Editor: He Duanhui (QQ / WeChat:) http: // beng.liuti.cn/ (service hotline:)