Common Faults and Solutions of Brake System of Forklift Gear Pumps

Forklift gear pump failure during the use of the process is difficult to avoid things, especially the braking system is often more often a failure, then when the forklift gear pump brake system, what are the common faults? And how? If you are interested in these issues, the next is the forklift gear pump brake system common failures and solutions introduced. Forklift gear pump brake system common failures and solutions First, the two can not brake at the same time, causing the failure of the reasons: 1, the gap between the two brakes or brake pipe clogging, this adjust the gap between the two brakes or Clear the pipeline; 2, the brake drum oil stains or brake shoe distortion, the solution is to remove oil or repair, replacement brake shoes; 3, brake the air in the pipeline, the solution is to rule out the brake pipe air. Second, hand brake failure, this may be due to relaxation of hand brake wire, the solution is to adjust the hand brake wire tightness. Third, the brake failure, failure reasons are: 1, brake drum and brake shoe clearance is too large, the solution is to modulate the gap between the brake drum and brake shoes; 2, master cylinder into and out of liquid valve failure , The solution is to access the inlet and outlet valves; 3, brake friction plate wear over, the solution is better friction plate; 4, friction plate contact surface is not enough, the solution is to repair the friction plate. Expand to read: China Construction Water Exhibition Pump Valve Pipe Fittings Exhibition Water Expo Xiamen Maritime Exhibition Internet + Forum Industrial Internet (Xiamen) Technology Co., Ltd. Asia Pump Network Editor: He Duanhui (QQ / WeChat:) http: // beng.liuti.cn/ (service hotline:)