Forklift gear pump lifting system common faults and solutions

Lift system is one of the five commonly used systems commonly used forklift gear pump, which is often encountered in the failure of the system, then the system what are the common failures? And how to solve it? With this question, then we will introduce the forklift gear pump lifting system common faults and solutions. Forklift gear pump lifting system common failures and solutions First, the gantry tilt is not synchronized, the fault occurs because the two inclined cylinder stroke inconsistency or cylinder pipe joints at the junction of the size of the hole caused by inconsistencies, when encountered The solution to this failure is to adjust the stroke of two tilting cylinders and to change the fitting with the same orifice. Second, the mast can not be hoisted when no load, this is because the multi-way valve overflow hole plugged, by clearing the multi-way valve overflow debris debris on it. Third, the fork racks descending too fast, this is because the inlet port speed limit valve does not work, this only needs to repair the speed limit valve on it. Fourth, the fork door automatically fall, this is because the lack of hydraulic oil tank caused by the solution is to overhaul multi-way valve, add hydraulic oil. Expand to read: China Construction Water Exhibition Pump Valve Pipe Fittings Exhibition Water Expo Xiamen Maritime Exhibition Internet + Forum Industrial Internet (Xiamen) Technology Co., Ltd. Asia Pump Network Editor: He Duanhui (QQ / WeChat:) http: // beng.liuti.cn/ (service hotline:)